Downloads

Discover how the QXD-Q7 electrostatic powder coating machine delivers professional automotive                                                
   parts finishing with superior durability, coverage, and efficiency. 

In electrostatic powder coating, one of the most common technical challenges is the Faraday cage effect.
This problem often appears when coating deep corners, narrow recesses, grooves, edges, and complex metal structures, where powder is harder to deposit evenly.
For many powder coating factories, this leads to several production problems:

• uneven powder coverage
• thin coating in recessed areas
• excessive powder build-up on outer edges
• repeated touch-up work
• lower spraying efficiency
• increased powder waste

Introduction
Electrostatic powder coating is widely used in industrial finishing, but many manufacturers still face persistent challenges such as uneven coating, powder waste, and difficulty coating complex shapes.
One of the most effective innovations in recent years is rotary bell spray technology, which significantly improves coating performance and efficiency.

Common Problems in Powder Coating
Traditional electrostatic spray guns often suffer from:
• Poor coverage in deep corners (Faraday cage effect)
• Uneven coating thickness
• High powder consumption
• Low transfer efficiency

How Rotary Bell Spray Technology Improves Performance
A rotary bell spray system uses a high-speed rotating cup to atomize powder through centrifugal force.
Compared to conventional spray guns, it offers:
• More uniform coating thickness
• Better penetration into complex shapes
• Higher powder utilization
• Improved surface finish

Upgrade Your Existing Powder Coating System
Instead of replacing your entire system, you can upgrade your existing spray gun with a rotary cup head.
This solution provides:
• Easy installation
• Compatibility with most powder coating guns
• Lower investment cost
• Immediate performance improvement
 

Coating equipment has been developing for decades, but the truly transformative changes have only occurred in recent years. Some believe the industry changed long ago; in reality, it was individuals who changed — not the industry itself.

Powder coatings may absorb excessive moisture during storage or transportation. During spraying, moisture affects powder flow and adhesion, resulting in powder clumps after drying and curing.

The application of electrostatic powder rotary cup spray guns in the coating of aluminum profiles and aluminum panels not only improves production efficiency and appearance quality but also contributes to environmental protection, energy saving, and sustainable development. By continuously optimizing processes and addressing challenges, this technology has helped the aluminum profile and aluminum panel industry achieve new breakthroughs in the field of coating, promoting the sustainable development of the entire industry.