High-Speed Centrifugal Atomization + Cross Powder Mist Solves Burn Edge and Leveling Problems, Powder Deposition Rate Increases by 2-3 Times
The black hardware parts sprayed by the customer with ordinary spray guns have obvious orange peel, particles and poor leveling on the surface. These are common spraying defects.
After switching to the rotational bell sprayer, these problems can usually be solved mainly due to:
• Finer atomization:
The rotational bell sprayer uses centrifugal force generated by high-speed rotation to atomize the coating more uniformly and finely, resulting in an extremely smooth coating surface.
• Higher powder deposition rate:
It has higher spraying efficiency, and the coating utilization rate can reach 2-3 times that of ordinary spray guns, which can save coating costs.
• More uniform film thickness: It can precisely control the coating thickness, avoiding sagging, accumulation and other problems that are prone to occur with ordinary spray guns, and is especially suitable for such products with high appearance requirements. The rotary nozzle spray gun adopts rotary centrifugal atomization and cross-rotating powder mist mode, which effectively solves the problem of powder burn edge.
